Powder – Wall (SA2)

Properties

  • Cement-based, containing washed, dust-free graded silica, along with various performance-enhancing additives.
  • Additives improve adhesion, viscosity, water reduction, plasticity, etc., at relatively higher levels.
  • Fast and easy mixing
  • No need for resin or any liquid adhesive
  • Good workability
  • High strength
  • Suitable for medium and relatively large-sized pieces
  • Suitable for installing new pieces over old ones (according to instructions)

Applications

Suitable for various water-absorbing pieces installed on concrete and cement walls in buildings, parking lots, public spaces, and both indoor and outdoor environments.

Application Method

  • The substrate and the back of the piece must be completely dry, clean, level, and free from contamination. The surface must be free of grease and dust.
  • A notched trowel must be used to create grooves for improved installation quality.
  • Each 20 kg bag should be mixed with approximately 5 kg of water. Pour the required water into the mixing container, gradually add the powder, and mix for about 2 minutes (using an electric mixer is recommended). Allow the mixture to rest for 5 minutes, then mix again for 30 seconds to achieve a uniform blend. The mixture is now ready for application.
  • Each square meter requires approximately 5 kg of mortar (one bag covers around 4 m²). The mortar thickness behind the piece should be 3–5 mm.
  • The working time depends on ambient temperature (about 30 minutes to 2 hours). Prepare in small quantities, and take precautions in extremely cold weather to prevent freezing.
  • Drying time is around 24 hours at 25°C, and after 48 hours, joint filling or any other finishing can be performed.
  • This product is intended for water-absorbing pieces.
  • If installing a new piece over an old one, the previous glaze layer must be partially removed (scratched) where needed.

Packaging

  • Supplied in 20 kg bags.

Storage Conditions

  • Store in a dry, covered place away from direct sunlight. A maximum of 5–6 bags may be stacked.

Shelf Life

  • Under proper storage conditions, the product remains usable for up to 6 months after production.
ملات خشک معمولی پودری - دیوار (Sa2)
ملات خشک معمولی پودری - دیوار (Sa2)